Boundary Markers-Pillars
Marking of property boundaries is a very
complex and highly specialized activity.
It is critical that boundaries be determined and marked accurately so it
is clear where properties begin and end.
Landowners need to know where property
boundaries are. Without owners knowing boundary locations buildings could be on
property lines, it could be difficult to meet set-back requirements, neighbours
could build on the wrong side of the line, and safety problems could occur with
construction over gas lines or other utility rights-of-way.
Home Owner should beware of throwing away the
survey Mark (pillars, Beacons etc.). If the survey Mark is just where that
fence post should be — please build around it. The cost of replacing a survey
marker could be as much as the cost of the fence, driveway or landscaping in
the first place.
Contractor should beware of damaging survey
Marks Contouring, grading, fencing, road building and other work with heavy
equipment is a common cause of destroyed survey evidence. Grading along
the boundaries of a lot, road, subdivision or pipeline right-of-way can result
in hundreds of survey pins being moved or destroyed. A Registered Land
Surveyor has to be retained to re-measure and re-establish the destroyed
markers. It adds to the cost of construction and, in the end, to the amount the
consumer must pay. The easiest way to avoid the problem is to ensure that
the metal pins are clearly identified prior to any earth moving activity so
that machinery can avoid them.
Repairing the damage; when survey evidence is
destroyed, it is often quite costly to re-establish. A Registered Land
Surveyor must re-determine boundaries by measuring from the closest survey
evidence that can be located. In some areas, the nearest evidence may be blocks
away or, in rural areas, miles away. Once the measuring has been
completed, a new mark can be put into the ground. Also, a new survey plan must
be prepared and filed at Land Titles.
Comments
Post a Comment